Prefab villa Xin Guang Zheng prefabricated steel house steel house construction Distributor

Prefab villa  Xin Guang Zheng prefabricated steel house   steel house construction Distributor

Energy conservation, Environmental protection and Easy assembled Villa

Prefab villa Introduction:

Prefab Villa used light steel structure frame with light weight energy saving board wall panel in wall and floor system. Our prefabricated house is easy installation, all frame in bolts connected at side to minimize transportation costs. Light gauge steel fame home could be designed the subfloor model, moistureproof, widely used in the coastal area etc. Prefab light steel villa we produce is very beautiful and high quality prefab homes.

Material of prefabricated steel house:

Generally, for the affordable prefab homes, there are some different materials assemble for different demand. Such as the traditional brick house, and the sandwich panel house for modular homes at site etc. XGZ company designed the new type housing, steel framed houses chose the light steel frame to has good strength and seismic or wind resistance. ALC panel ( or cement compound panel) for wall, Its high comfort and good insulation performance, Energy saving and environmental protection, and fast install than brick wall.

The customers could choose the color of the prefab cabins roof and wall paint, as their prefer.

The low running cost is up to its competitiveness.

Steel house construction Layout: 3 bedrooms, 2 living room,1 open kitchen,3 washing room, 1 Laundry room

Luxury prefab homes Buikdubg area: 135.4㎡ house + 17.2㎡ Terrace

Xin Guang Zheng Prefab House Description:

- Functional requirements -- livable and comfortable, reasonable layout, dynamic and static partition, clean and dirty partition, and open toilets;

- Requirements for the module system -- the width of the factory standard plate is an integral multiple of 300MM

- China prefab homes designed the subfloor model, moistureproof, widely used in the coastal area etc.

Prefab villa structure:

1/ Prefab bungalow house used light steel structure frame with ALC board in wall

2/ Prefab bungalow homes:Fast installation, all frame in bolts or weld connected at side to minimize transportation costs.

3/ The steel home has a good seismic resistance, wind, heat insulation, thermal insulation and other properties, the housing comfort than the traditional concrete structure and light steel keel structure housing

4/ Designed the terrace, more convenient the living interesting,

5/ The entrance is provided with a door-bucket.

6/ Designed three washing rooms, excepy one closed to living room, there are two bedrooms with washing room and Walk-in closet, the life is more convenient.

7/ Designed the laundry room

8/ Exterior could paint or decorated by wood plastic board etc.

As a prefabricated villa china manufacturers, we can design according to your needs.

Advantages of Prefab House:

1. High stability of importing prefab homes from china.

The structure of the structure is good in integrity and light in weight, and it can resist earthquakes over magnitude 9 and hurricanes with wind speeds up to 50 m / s.

2. Quickly completion.

It only takes one to two weeks to complete the installation of the main structure of a house of 200 to 300 square meters, and it takes only one month to reach the rough decoration standard. 700 square foot modular homes can also be built quickly.

3. Light steel structure frame are suitable for construction on various geological conditions.

It can be built on some foundations with lower bearing capacity (such as mountainous and hilly areas) without special foundation treatment.

4. The construction of prefabricated houses is less affected by climatic conditions.

5. Light steel structure frame home has more use area.

Residential area can be as high as 92%, which is about 7% -10% more than traditional buildings.

6. The appearance of the prefabricated house is rich and diverse.

Both luxury and minimalist homes are available. 

Xinguangzheng services:

If you want order our 2 bedroom prefab cottage, you will get the best product and service. “Customer first” is our business philosophy.

If you are finding prefabricated villa China suppliers and manufacturer, you can choose us. As a professional company in China, We can help you solve design problems and provide solutions. We guarantee product quality and construction time.

We have many success projects. 

More products information can be searched through the search box at the top.

ALC custom Prefab Villa we produce is very beautiful, which with light weight energy saving board wall panel in wall and floor system.

For more product information, please click here.

https://www.steelbuildingtech.com/prefab-house/prefab-villa.html

What Is The Future Direction Of Prefabricated Buildings?

Prefabricated buildings have never taken off, and most architects think that a good thing is going so slowly. What's going on? At first glance, it has huge advantages. Faster, better, safer and more environmentally friendly. Why don't you use it on every building?

We unravel all these ideas of prefab house.

First, prefabricated parts speed up construction time: the main body of the building can be built in the factory, while the foundation and infrastructure can be completed on site. Time is money. In architecture, time is money.

Secondly, the quality of workmanship is always better in stable factories than in open-air sites. Although only heavy objects such as concrete and bricks can be placed on site.

Third, it is safer for workers to build in a factory on stable floors rather than high places and with better security controls on site. It is particularly easy to manage if workers are assembling materials for upper rooms or units on the factory floor. Prefabricated units for dining rooms, toilets and emergency rooms are far better built in factories than in muddy places.

Finally, and most importantly, it is now more environmentally friendly in many ways: the use and investment of materials are better controlled, waste can be more effectively recycled; transportation is reduced: all tools are placed in a safe Instead of traveling by truck and light truck across the city; workers can take public transport to a convenient location instead of driving to various places every day.

These positive ideas have remained the same for 70 years, but prefabricated parts remain a niche market rather than the mainstream, especially in Australia, where the proportion of high-quality prefabricated houses is the lowest.

Where prefabricated homes thrive in Australia is at the lowest end of the market: site sheds, mining waste gas, and mobile homes in mobile home parks (never move). Over the past 10 years, some niche contractors have been set up in Melbourne to design and build high-end homes, but the NSW industry around Gosford remains focused on the cheap and leisure market.

Unlike Australia's understanding of prefabricated houses as a cost-driven alternative, in the United States, prefabricated parts are being advocated for the construction of complex, ingenious homes, while prefab villas are not possible in the field construction, and they the construction cost is also comparable. But the complexity of financing, the limited number of high-end customers, and the global economic recession have driven early innovators in the industry. However, as in the past 13 years, Living House in Los Angeles continues to build an ever-increasing number of exquisite high-tech homes.

Prefab Villa

Because containers are made of high-strength rust-resistant and weather-resistant steel, prefabricated plants often think of shipping containers as a simple entry point. They can withstand extreme weather and can stack six to eight tall basic features. But for a room with a width less than 2.4 meters and a length less than 6 or 12 meters, this is a terrible size. If you are looking for student accommodation, backpackers or emergency accommodation are great.

However, it is not very good for conventional housing. One of the best exploratory companies, Logical Homes, Louisiana, abandoned its attempt to use container shipping because of the double problem of the need to cut large volumes into suitable spaces and the authorities required unreasonable certification to enable joint venture Businesses cannot survive. Sydney's Environa Studio also found limitations when building future homes in a built environment in a Sydney Opera House show house. Except for the strength of the four corners, it is best to start from scratch.

One of the problems with all these pre-made solutions is that you are actually moving an empty house when you transport the house: the building itself is space, and moving space is cumbersome and expensive. What if you could prefabricate the house parts instead of the prefabricated house itself? A part of the entire building is prefabricated and these parts are then packed and shipped to the site.

This is an extension of the currently used small factory-manufactured components (such as doors and windows, joinery) that can be transported to the site by truck and assembled by crane and bolted together. You can make whole walls with windows, large floors or compact and complex rooms such as bathrooms.

This is the principle behind IKEA (now manufacturing prefabricated houses) “packing”. . Over time, more and more wood surfaces were exposed in each building.

Where is the market for low cost prefabricated houses? Most likely, prefabricated houses and small homes will continue to be manufactured in entire units, and CLT will be used more and more, but the most interesting development will be the "assembly" rather than "build" component automation. . The most important story is how Toyota invented a new, diversified purchasing and high-quality assembly method to replace the old concept of the production line.

The method of prefabrication has been the same since 1946, but there is a completely different method, that is, the key parts are manufactured by independent factories, which are precisely assembled together in the frame to complete the whole process in a short time. Building with unprecedented micro tolerances and high quality. This way of working must be the subject of the future.

What Are The Advantages Of Steel Structure Water Tank?

Steel structure water tank tower supplier to share with you : if the water supply system USES non-negative pressure water supply equipment, there is no need to set the water tank, because the non-negative pressure water supply equipment can be directly connected to the municipal pipe network, so the rigid structure water tank is generally used for the water supply system that needs to store water.

Steel Structure Water Tank Tower

Steel structure water tank tower is a new generation of water tank products after glass reinforced plastic water tank, its products are made of edible stainless steel plate precision molding, beautiful shape, economic and practical, the main durable. The rigid structure water tank is compared with other water tank, have the appearance beautiful, the weight is light, the strength is high, the corrosion resistance, the high temperature resistance, the water quality is clean, the seepage prevention, the aseismatic, never gives rise to the moss, the water quality has no secondary pollution, the installation is convenient, is easy to clean and so on many advantages.

Advantages of steel structure water tank :

One, the free selection

Can be any combination, this type water tank, due to its unique piece, its capacity from 0.125 m3 to 5000 m3 to select a wide range, set the place without limit, can be assembled into mobile water tank, also can be assembled into a fixed water tank, has a great deal of flexibility.

Two, light and durable

Using the stamping forming process production, unique plate, with minimum material consumption to achieve high strength requirements.The weight is only a third of the ordinary steel tank, the price is close to the ordinary steel tank.

The strength of stainless steel material is equal to 1.5 times that of conventional material, 6 times that of glass fiber reinforced plastic, which is shock resistant, snow resistant, wind pressure resistant and impact resistant.At the same time, it is proposed to adopt more reasonable mechanical structure than imported equipment, with 1.5mm~2.5mm plate stamping processing and forming, its weight is only 1/4 of the ordinary steel products, greatly reduce the consumption of materials, unique plate shape, high difficulty of stamping forming process, with minimum material consumption to achieve high strength requirements, lightweight and durable.

Food grade materials to ensure water quality

Choose food grade steel plate, strong corrosion resistance, and can effectively reflect the sun's rays, no algae breeding, keep the water clean.

Adopt the food grade stainless steel material with excellent corrosion resistance, completely block the sunlight irradiation, no algae breeding, no algae seen in the resin tank and uv irradiation caused by the tank strength drop phenomenon.In addition, special antirust and scale removal device can achieve the purpose of semi-permanent antirust and greatly improve the service life.

Four, beautiful and generous

Steel structure water tank tower china stamping forming, high strength, light weight, appearance clean, beautiful and elegant; Water tank board generally adopts high nickel 8.0 above 3042B board, the surface is smooth and beautiful, easy to clean.

Five, good sealing

Unique structural design, full welding field combination, with excellent strength.Different from the screw structure, the seal strip is dispensed with, the surface has a dense oxidation layer, excellent corrosion resistance, no leakage, good sealing.

Six, easy to heat insulation construction

Because of its unique shape design, the installation of thermal insulation panels is very convenient for construction in cold areas.

Mobile Temperature Measurement & Sanitization Channel Temperature Measurement Channel

Mobile Temperature Measurement & Sanitization Channel    Temperature Measurement Channel  AI Face Recognition Channel  

XGZ Building Technology Company developed Mobile Temperature Measurement & Sanitization Channel is an accurate, convenient and intelligent integrated device for temperature measurement and sanitization. It integrates a variety of high-tech intelligent means such as microwave detection, infrared spectroscopy and face recognition to make non-contact monitor and sanitize on human body and object. It can concisely, safely, intuitively and accurately determine whether there is an abnormal temperature of the personnel. If there is an abnormality, the device will issue an audible and visual alarm. Each device adopts ergonomics and intelligent operation, which can effectively reduce personnel input in public health emergencies and prevent the spread of large-scale epidemics.

Design Purpose

Following ergonomics, the design style is convenient for adults, children, the elderly, the disabled, wheelchairs, pets, etc. to be detected and disinfected.

The fully-automatic intelligent control design greatly reduces the human operation and monitoring workload, reduces security pressure, and greatly reduces the work danger of high-frequency contact with people in the public area, and effectively avoids cross infection.

Mobile Temperature Measurement Channel Applicable Scene

This product is designed for temperature-taking and general sanitization of people in public areas, such as: Office building, Station, Community, School, Supermarket, Mall, Factory, Hospital, Hotel..

Model	XGZ-01B
Size(cm)	180(L)*110(W)*240(H)
Main frame	Prefabricated	Assembled
Personalized customization	Multiple color options, LOGO customization, etc
Working voltage	110~230V
Working current	50/60HZ
Main frame material	Steel / Aluminum alloy
Weight (kg)	365/180
Delivery	12units/40HQ	25units/40HQ

Temperature Measurement & AI Face Recognition Equipment

1. Temperature detection: Temperature detection using infrared thermal imaging technology.

2. High temperature alarm: The device will automatically alarm when the temperature exceeds 37.3°, which is conducive to the epidemic situation to control and control the key personnel.

3. Face recognition: Use international leading face recognition algorithm technology to detect faces.

4. Mask recognition: Voice prompts without masks are prohibited.

5. Using RK3399 scheme: Powerful CPU, which is conducive to the stable operation of the device in actual scenarios.

6. Using a binocular camera: Supports live detection, reducing the impact of facial expressions and the risk of photo fraud can be used during the day and at night.

7. Management platform: Optional supporting management platform to realize personnel management, access control management, attendance data management, temperature measurement data management and other functions.

Equipment  Parameters
Temperature Measurement System	Core temperature measuring module	Made in Germany
	Human induction method	Microwave detection
	Body temperature sensing method	Infrared spectrum type (precise real-time living body detection)
	Optical spectrum range	8-14µm
	Body temperature collection distance	0.5m
	Body temperature collection accuracy	±0.3℃
	Body temperature collection range	34~45℃
	Temperature collection time	2s
	Application environment	An indoor environment of 15-29° is recommended
AI Face Recognition System	Liquid crystal display	8.0 inch, capacitive touch screen, distinguishability:1280*800
	OS	Android 7.1
	CPU	RK3399
	Number of stored faces	>30000
	Recognition rate	≥ 99.8%
	Recognition distance	10-20cm
	Voice prompt	Chinese/English/French/ Spanish, etc
	Binocular camera	RGB 2 megapixels, wide dynamic support, dynamic range 115dB, strong light
	Fill-in light	LED
	Card identification	Optional
	4G / WIFI / Bluetooth	Optional
	Voice/video calls	Optional
	Secondary development	Open interface
Hand Disinfection		Infrared induction spray

Atomized System Parameters
Anion purification	√
Add water way	on the top
Atomizing tablets	4 pcs
Capacity	23.8L
Output of fog	2000ML/H
Rated power	110W
Safeguard	Power off protection in case of water shortage
Intelligent constant humidity	43-90%RH, Indoor humidity controllable
Remote control	6m
Timing function	12h
Consecutive humidifying	24h
Sleep patterns	√
Screen	LED touch screen

Xin Guang Zheng Product Advantages

1) CONVENIENT---Flexible movement as required.

2) REASSURED---Food grade disinfection products.

3) EFFICIENT---Automatically face recognition.

4) SAFE---Remote temperature control alarm.

5) PROFESSIONAL---We have more than 23 years production experience and producing top quality products at competitive prices.

This Mobile Sanitization Channel is designed for temperature-taking and general sanitization of people in public areas, such as: office building, station, community, school, supermarket, mall, factory, hospital, hotel.

More information about disinfection channels, please click here.

https://www.steelbuildingtech.com/